A headset-mounted mini sampler for measuring exposure to welding aerosol in the breathing zone.Exposure to fuel-oil ash and welding emissions during the overhaul of an oil-fired boiler.Predicting benzene vapor concentrations with a near field/far field model.Occupational exposures to styrene vapor in a manufacturing plant for fiber-reinforced composite wind turbine blades.Manganese and welding fume exposure and control in construction.Manganese exposures during shielded metal arc welding (SMAW) in an enclosed space.This study emphasizes the need for field-derived welding fume generation rates and showed the personal breathing zone and area sample concentrations can be described by the two-zone model in a way that may help the industrial hygienist estimate exposures. The field-based generation rates were considerably lower than laboratory-derived published emission rates of between 280 and 650 mg/min for TP. The average generation rate in the breezeway was 40.0 mg/min for TP, 6.6 mg/min for Fe, and 1.2 mg/min for Mn. The average generation rate in the boiler room was 39.2 mg/min for TP, 6.4 mg/min for Fe, and 1.3 mg/min for Mn. The steady-state form of the two-zone model was applied to long-term and short-term sample total particulate, Fe, and Mn concentrations obtained during welding in the boiler room and breezeway. Both tracer gas and anemometer techniques were used to estimate ventilation of the boiler room. Average arc times ranged from 20 to 25% of the total sampling time. The boiler room average personal breathing zone sample total particulate concentrations ranged from 4.73 mg/m(3) to 5.90 mg/m(3), Fe concentrations ranged from 0.48 to 0.85 mg/m(3), and Mn concentrations ranged from 0.06 to 0.16 mg/m(3). Breezeway average personal breathing zone sample total particulate concentrations ranged from 2.89 mg/m(3) to 4.38 mg/m(3), Fe concentrations ranged from 0.53 to 0.63 mg/m(3), and Mn concentrations ranged from 0.10 to 0.12 mg/m(3). Samples were collected and analyzed for total particulate following NIOSH Method 0500 and for select metals following NIOSH Method 7300. The study is unique in that one welder was evaluated under high production conditions for 2 days at two different welding locations: a boiler room and a breezeway. The resulting breathing zone (near field) and area (far field) welding fume concentration data were applied to the two-zone model for the purpose of determining field-derived personal exposure emission (generation) rates during actual welding work. N2 - This study assessed a professional pipefitter/welder performing shielded metal arc welding on carbon steel under field conditions. JF - Journal of occupational and environmental hygiene T1 - Two-zone model application to breathing zone and area welding fume concentration data. This study assessed a professional pipefitter/welder performing shielded metal arc welding on carbon steel under field conditions.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |